Fiat 500 Key Fob Replacement
If your 500 key fob doesn't work Try a different one to see if your car will detect it. If it does, then the problem is probably with the battery or water damage to the fob that was originally used.
Replace the battery first. The "+" side should be facing downwards.
Dead Battery
The majority of the time, when a fob won't work, it's just because the battery is dying. It's simple to fix it and the majority of fobs will give you a warning if the battery is running low. There are instructions for the majority of car fobs YouTube or in the owner's guide. You can also bring it to a locksmith in your area or the dealer that provided it to you to repair it.
Other times, a device can be inoperable and there could be a problem with the circuit board inside. It's not often but it does occur. If you dropped the fob on something hard it could cause damage to the internal chip. It could be a problem if you have an aftermarket fob and the key doesn't work. In this instance, you will need to go to a locksmith or dealer and get it reprogRammed to work with your 500.
One 2012 FIAT FIAT 500 flip key remote - resembles Ilco with locks, unlocks, and trunk buttons – new replacement keyless entry (will require cutting and program by a locksmith).
Chips damaged
Fiat 500 key fobs are wireless devices that transmit an alert to the car every time you press the button. It contains a microchip with details about the code required to connect with your car. If the chip is damaged, it won't transmit the correct code, and the car won't start. A locksmith can repair this type damage. United Locksmith can complete this repair on both traditional and modern models, so do not hesitate to contact us.
You can purchase a new fob and have it programmed professionally by locksmiths. It's less expensive to do this rather than going to a dealer and it performs the same. You'll need to provide some details to the locksmith, like the year your car was built and the model.
If you're not sure how to fix this problem Try using the help of a US dollar bill. The copper on the bill is abrasive enough remove dirt and oxidation, however, it won't cause damage to the microchip. If the chip is physically damaged however, it may not be in a position to be repaired. This can happen when you drop it or hit it by your vehicle.
Water Damage
Water damage is likely to occur on your key, regardless of whether you dropped them in the pool unintentionally or left them in a pocket while swimming, or splashed water over them during a rainy afternoon. Even if you only have some water on the keys, this could cause serious problems for the electronics inside and stop it from working properly.
The good news is that you can often solve this issue by removing the key fob and using an old towel to scrub it of any remaining dirt or water. After the fob is dry, you can then replace the battery and it will begin functioning normally.
fiat car keys can take it to an auto repair shop or locksmith to get it professionally cleaned and programmed. The professionals will be able to use special equipment to make sure that the key fob is compatible with your car's computer system.
When your Fiat 500's key fob fails to function, it can be a stressful and frustrating. It can be expensive and difficult to transport your key fob to the dealer. Locksmiths can replace your key fob, without having to visit a dealership. This is why they are a superior choice than a dealership.
Pairing Issues
When you drop your key fob, or it stops working, and nothing else appears to be problem It could be due to the chip has gone out of sync. It could be due to water damage or a dead battery.
Often, this can be done by following the instructions in the owner's manual. If you're having problems or your manual isn't working then you should hire an automotive locksmith complete this task. This will ensure that the chip isn't fried, and it's also the cheapest alternative.
Another issue facing 500 owners is that the key fob won't secure the car. This could be a problem if you intend to fill up at gas stations. Some owners have reported their 500's locking mechanism failing and needing to replace the entire intermediate shaft of the steering. This issue has been cited in a technical service bulletin (TSB) issued by Fiat.
A reputable locksmith is able to assist you when your Fiat is experiencing issues. They can duplicate your key or create a new key that locks and starts the car. They can do this without seeing your old key, and it's generally cheaper than buying a new one from a dealer.
